I Think About The Implications Of Diving In Too Deep

I just finished putting 100 1 1/2-inch stainless steel screws into the marquee for the theatre I built last spring. The plywood facing is starting to warp just a bit, which is creating just enough of a gab between it and the plastic tracks so that the letters are falling through the gap between them. So, I ended up putting in a bunch more screws into the tracks, on roughly 2-inch centers, in order to push it flat against the plywood.

It sounds like overkill, I know, but I initially tried adding screws on 4-inch centers and found places where the letters would still slide out of position, so overkill it had to be.

Now, we'll see how long it lasts...